Products by Features
 | Product Features
Applications
|
Product Summary The ADM-AMC-5A2 is a high performance reconfigurable AMC board based on the Xilinx® Virtex-5 LXT, SXT and FXT range of Platform FPGAs. Designed specifically for the AMC format (ATCA and uTCA systems), the ADM-AMC-5A2 provides PCI Express® connectivity via the backplane, 6 HD-SDI/ASI Video ports, 2 Gigabit Ethernet ports, and a separate DSP chip (TI 320C6415). On board battery provides back-up for encryption. | |
Front Panel I/O
Dual Gigabit Ethernet Ports
4 HD-SDI/ASI Outputs
2 HD-SDI/ASI Inputs
JTAG I/F
Provides the user access to configure the Target FPGA and to run Chipscope on the active design
Config Switches
Allows host to configure the board.
DDR-II SDRAM
DDR-II SDRAM connected to the bridge FPGA
Local Bus
Links bridge and target FPGAs. 32/64bit wide data transfers, programmable clock rate 10MHz-80MHz, includes Demand mode DMA handshaking.
PCI Bridge
Alpha Data proprietary firmware is provided for the bridge. It is automatically loaded into the bridge FPGA at power-up.
Provides PCI bus access to/from the host system. Includes multiple DMA engines for fast data transfer.
DMA Engines
Multiple DMA engines allowing fast data transfers to/from the FPGA. Can perform Demand Mode DMA allowing the target to control data transfers.
Rear I/O
Provides 8 High Speed Serial I/O links.
Target FPGA
Application/Target FPGA.
Target Device(s)
family : Virtex-5
footprint : FFG1738
devices : LX110T, LX155T, LX220T, LX330T, SX240T, FX100T, FX130T, FX200T
DDR-II
DDR-II SDRAM connected to the target FPGA.
1 or 2 GByte in 4 independent banks of DDR-II (64M or 128M x 32-bits @ 333MHz)
DSP
The TI DSP chip has it's own FLASH for programming it and it's own bank of ZZBT memory for holding data.
Battery Backup
The ADM-AMC-5A2 is fitted with a battery slot to allow encryption keys to be backed up
MMC Interface
The ADM-AMC-5A2 has a MMC serial port for system management access to the board.
| Product | ADM-AMC-5A2 | ||||
| Board Format | AMC | ||||
| Type | FPGA Board | ||||
| Host Interface | PCIe® | ||||
| Functional Summary | The ADM-AMC-5A2 is a high performance reconfigurable AMC board based on the Xilinx® Virtex-5 LXT, SXT and FXT range of Platform FPGAs. | ||||
| Functional Description | Designed specifically for the AMC format (ATCA and uTCA systems), the ADM-AMC-5A2 provides PCI Express® connectivity via the backplane, 6 HD-SDI/ASI Video ports, 2 Gigabit Ethernet ports, and a separate DSP chip (TI 320C6415). On board battery provides back-up for encryption. | ||||
| Target Device(s) | family : Virtex-5 footprint : FFG1738 devices : LX110T, LX155T, LX220T, LX330T, SX240T, FX100T, FX130T, FX200T | ||||
| Host Interface | x4 PCI Express® Interface 2 x Gigabit Ethernet 8x High-Speed Serial Links from Target FPGA | ||||
| On board memory | SDRAM : 1 or 2 GByte in 4 independent banks of DDR-II (64M or 128M x 32-bits @ 333MHz) ZBT : 8MBytes (1M x 72-bits) ZBT connected to the DSP FLASH : 32MByte user Flash connected to the DSP FLASH : Configuration Flash providing an initialisation design for automatic loading into the target FPGA. | ||||
| Software | Drivers for Windows, Linux and VxWorks™ | ||||
| Specific Functions | DSP: TI 320C6415T DSP chip with 8MBytes of ZBT memory DS2432 EPROM with SHA-1 engine | ||||
| Applications | Broadcast, Medical/Bioinformatics, Telecoms, Military, Aerospace, High Performance Computing | ||||
| Front Connector I/O |
| ||||
| Rear Connector IO |
| ||||
| Board Configuration | Clocks : Local bus programmable up to 80MHz Low-jitter reference clocks: 125MHz, 200MHz, 148.50MHz, 148.3516484MHz FPGA : PCI Express® bus direct to SelectMAP port From Flash direct on power-up External JTAG connector | ||||
| Battery | Single battery back-up for FPGA encryption keys | ||||
| Environmental Specification | Temperature : Operating Temperature 0° to +55°C Non-Operating(Storage) Temperature -40° to +85°C Operating Humidity 5% to 95% at 40°C non-condensing Non-Operating(Storage) Humidity 5% to 95% at 40°C non-condensing EMC : FCC 47CFR Part 2 EN55022 Equipment Class B | ||||
Further Environmental Information can be found by reading: |
| Product code |
ADM-AMC-5A2/z-y(m) | |
Virtex-5 Device | z | LX110T, LX155T, LX220T, LX330T, SX240T, FX100T, FX130T, FX200T |
Virtex-5 Speed | y | 1, 2, 3 |
Memory | m | blank=1GByte, /2=2GBytes |
Sample Code :
ADM-AMC-5A2/LX110T-1
Order Code generation
Go to Order Code Generation Page which allows the generation of specific order codes. The numbers created on this page are for illustration purposes, please contact Alpha Data for more information.
Sales Questions
For any sales questions regarding the ADM-AMC-5A2, please e-mail us at:
Technical Support
For any technical questions regarding Alpha-Data products please e-mail us at:
